Wireless Manual Call Point
Wireless Manual Call Point
The Wireless Manual Call Point is powered for 10 years battery an emergency device that when activated transmits a radio frequency (RF) alarm signal. This alarm signal will cause all RadioLINK alarms (in the system) to sound and thereby warn occupants of the immediate danger. The device is powered by tamperproof lithium cells designed to last the life of the product. The cell power is monitored and an end of life signal is given when the batteries are depleted. The transmissions are frequency modulated (FM) and use Manchester coding to ensure robust signal integrity and avoid signal noise interference.
Wireless Smoke Detector
Wireless Smoke Detector
The Wireless Optical Smoke Detector sensor fitted with 10 Years Battery filled with a proprietary photoelectric sensor to quickly sense low energy smoke particles. This optical Alarm is sensitive to all domestic fire types but is especially sensitive to smoldering fires. The Sensor range features a high performance optical chamber protected by a sealed mesh screen to reduce insect and dust contamination and EMC protection to reduce false alarms. In addition the sensor has an automatic dust compensation feature reducing further the risk of false alarms caused by dust build up.
Wireless Heat Detector
Wireless Heat Detector
The Wireless Heat Detector is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations and other areas where there is normally some level of smoke or fumes and where smoke Alarms may be subjected to false alarms.
The Sensor is powered by a 10 year sealed Lithium battery. The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.
Wireless Fire & CO Detector
Wireless Fire & CO Detector
The Wireless Fire & CO Detector is powered for life (>10 years) intuitive remote controller for RadioLINK wireless Fire and CO (Carbon Monoxide) Alarm systems. It is a completely wireless and can be wall mounted or free standing. In standby the Alarm system can be easily tested by just pressing the button. This will test and sound all the Alarms. When the system is activated the triggering Alarm can be identified (located) by simply pressing the button. Once identified it may then be silenced by pressing the button again. The Ei450 will identify the triggering Alarm and indicate if it is a fire (smoke or heat) or CO (Carbon Monoxide) Alarm by flashing the appropriate icon.
Room Occupancy Detection System
Room Occupancy Detection System
Our Room Occupancy Detection System can detect and monitor the presence of people, in real time. Automatically detect occupancy in meeting rooms, offices or workspaces. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.
Table Occupancy Detection System
Table Occupancy Detection System
Our Table Occupancy Detection System detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.
Desk occupancy Detection System
Desk occupancy Detection System
Our Desk Occupancy Detection System accurately detect and monitor passive infrared radiation (PIR) emitted by a person sitting at a desk. When a person enters the sensor’s field of view, the sensor detects motion and tells you someone is present within that space, without detecting people in the surrounding areas. We recommend installing this sensor under the table instead the floor hence this will not damage by any external force. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life. All sensors send securely to a local network or the cloud — via Ethernet, LTE.
Voice Toilet Alarm System
Voice Toilet Alarm System
Our IP Disabled Toilet Alarm System with Voice, fully equipped with Voice over IP solutions which offer full duplex voice communication to the central monitoring for any assistance required by the users. Speech can be activated by pressing hands-free IP devices or can be automatically activated if any call buttons pressed.
To operate the user pulls the cord of a ceiling pull cord or to press call buttons to activate a light and sounder outside the wc and alarm information sent through network to its monitoring server. Voice Hands free can be activated by pressing call buttons or automatically if programmed in the system. Once Operator monitor and acknowledge this alarm to take initiative according to customer requirement.
IP Voice Toilet Alarm
VOIP Disabled Toilet Alarm
Our IP Disabled Toilet Alarm System with Voice fully equipped with Voice over IP solutions which offer full duplex voice communication to the central monitoring for any assistance required by the users. Speech can be activated by pressing hands-free IP devices or can be automatically activated if any call buttons pressed.
To operate the user pulls the cord of a ceiling pull cord or to press call buttons to activate a light and sounder outside the wc and alarm information sent through network to its monitoring server. Voice Hands free can be activated by pressing call buttons or automatically if programmed in the system. Once Operator monitor and acknowledge this alarm to take initiative according to customer requirement.
VOIP Disabled Toilet Alarm
VOIP Disabled Toilet Alarm
Our IP Disabled Toilet Alarm System over Network Voice fully equipped with Voice over IP solutions which offer full duplex voice communication to the central monitoring for any assistance required by the users. Speech can be activated by pressing hands-free IP devices or can be automatically activated if any call buttons pressed.
To operate the user pulls the cord of a ceiling pull cord or to press call buttons to activate a light and sounder outside the wc and alarm information sent through network to its monitoring server. Voice Hands free can be activated by pressing call buttons or automatically if programmed in the system. Once Operator monitor and acknowledge this alarm to take initiative according to customer requirement.