Metal Detector

(12 votes, average 4.92 out of 5)
Rate this item
(14 votes)
Written by  Published in: Special Equipments
Metal Detector - 4.9 out of 5 based on 14 votes

Walk Through Metal Detector

The Walk Through Metal Detection system is use to detect all kinds of concealed deadly firearms, bladed knives, grenade and all kinds of metal weapons. A non conductive, nonmagnetic device that fixes the position of the detector plane and detector axis with respect to the three-axes translation system.

Our metal detector approved for U.S. and European airports that indicates whether multiple targets are located on the left, right or center of the body as well as vertical location. Our Detector leads the industry with superior pinpoint technology and unmatched discrimination features. Designed for maximum throughput without compromising security.


• 33 pinpoint zones to precisely identify multiple target locations from head to toe on the left, center and right.
• 22 standard programs for security application versatility.
• International security standards— meets the world's highest test certifications
• Dual detection: with transmitters and receivers in each panel
• Advanced broadband detection technology provides superior target analysis
• Directional counter with four settings for counting (forward, reverse, subtract in reverse, and bi-directional)
• Superior versatility: selectable settings designed for airports, courthouses, prisons, schools etc.
• Networking ability: CMA provides networking, remote control, monitoring, data analysis and group management
• Meets IP55 standards for moisture and foreign matte protection
• Limited 24-month warranty: parts and labor.


Technical Specification

 Operating: -4° F (-20° C) to +122° F (50° C)
 Humidity to 95% non condensing
 Storage: -40° F (-40° C) to 158° F (70° C)

 Fully automatic 100 to 240 VAC, 50 or 60 Hertz, 45 watts; no rewiring, switching or adjustments needed.

Weatherproofing / Foreign Object Protection Standards
 Meets IP 55, IEC Standard. "Degrees of Protection provided by Enclosures," IEC 529. *IP 65 optional.

Target Pinpointing Lights
 Thirty-three (33) distinct zones are displayed with two (2) independent columns of LEDs located on exit side of PD 6500i.

 More than Twenty (20) independent programs designed to meet all installation specific requirements including ECAC requirements for European airports and TSA requirements for U.S. airports.

Multi-Unit and Multi-Brand Compatability
 2,300 selectable operating frequencies and multiple channels allow the PD 6500i to operate in close proximity to other PD 6500is as well as with non-Garrett walk-throughs.

Interference Suppression
 Advanced analog and digital filtering—as well as adjustable operating frequencies—eliminate the potential effects from x-ray units, radios and other electrical interference sources.

Directional Counter
 Counter tracks the number of patrons that have passed through the
 detector, the direction of patrons, the number of alarms and calculates alarm percentage. Four directional count settings (forward, reverse, subtraction reverse and bi-directional).

Random Alarm Feature
 Provides ability to randomly alarm on a selected percentage of non-alarming persons; adjustable from 0 to 50 percent.

 Audible tone and volume adjustable. Bright LED visual alarm.

Pacing Lights
 International symbols located at entrance.

All settings are secured with a key lock and two levels of access codes. Further security is accomplished with a cabinet lock which prevents unauthorized access to physical cables, connectors and electronics.

Control Outputs
Solid state switches (low voltage AC or DC) for operating external alarms and control devices.

Attractive scratch and mar-resistant laminate. Detection Heads and Support: Heavy duty aluminum.

24 months, Limited parts and labor


Dimensions WT MD

Passageway Interior Size

Width 30" (0.76 m)
Height 80" (2.03 m)

Depth 23" (0.58 m)
Overall Exterior Size
Width 35" (0.90 m)

Height 87" (2.21 m)
Depth 23" (0.58 m)
Shipping Size

Width 35.5" (0.90 m)
Height 91.5" (2.32 m)
Depth 6.25" (.16 m)
Weight: 143 lbs. (64 kg)
Shipping Weight: 165 lbs. (74 kg)


PD 6500i™ Enhanced Pinpoint
Walk-Through Metal Detector
PN 1168414 / 1168424  Gray  Gray
PN 1168411 / 1168421  Beige  Beige
MT 5500™ Walk-Through
Metal Detector
PN 1167700 / 1167720
CS 5000™ Walk-Through
Metal Detector
PN 1167410 / 1167420

Hand Held Metal Detector

    Ultimate sensitivity: detects medium sized pistol from 9" distance; large knife from 6"; razor blades and box cutters from 3" distance; foil-wrapped drugs and tiny jewelry from 1".
    Self-calibrating: digital microprocessor technology eliminates the need for periodic sensitivity adjustments.
    Rugged, high-impact ABS case with reinforced coil compartment. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II and IV.
    Large 8" scan surface for quick, thorough scanning.
    No tools required to change standard 9V battery (included). Optional rechargeable battery kit available.
    Sharp audible alarm and bright red LED indicates the detection of metal.
    Momentary push button helps temporarily eliminate detection of nearby ambient metal such as rebar, metal walls.
    Three-color LED indication: Green LED indicates ON; Amber LED indicates LOW BATTERY: Red LED indicates ALARM.
    Operating temperatures: -35° F (-37° C) to 158° F (70° C)

Contact us for more information.

Read 6858 times Last modified on Monday, 14 December 2020 09:24

CEO & Founder

More in this category: Security Road Blocker »
Login to post comments