Outdoor Wireless Gateway

Published in: Outdoor Parking Guidance
Outdoor Wireless Gateway - 5.0 out of 5 based on 7 votes

Outdoor Wireless Gateway Controller

The outdoor central wireless controller is the core of the whole system. As the information collection and control center of the whole outdoor parking guidance system, it is responsible for collecting and processing real-time parking space status. It helps to guide vehicles to available parking spaces via the real-time updating of data and information displayed on signage. All the data for the parking guidance system, like outdoor magnetic sensors, Wireless LED display can be transferred to Central server for PGS software by LAN/WN or wirelessly as required. It can function properly as its protection grade reaches up to IP66..

Outdoor Zone Controller

Published in: Outdoor Parking Guidance
Outdoor Zone Controller - 5.0 out of 5 based on 9 votes

Outdoor Zone Controller

Outdoor wireless zone controller communicate all magnetic parking space sensors to the central controller in real-time collection of parking status, update the wireless parking LED display zone wise. It’s designed under strict industrial standard and assembled with the international standard, which ensure its stability and reliability to resistant to water and dust with a protection level of IP66.

Wireless Magnetic Parking Detector

Published in: Outdoor Parking Guidance
Wireless Magnetic Parking Detector - 5.0 out of 5 based on 10 votes

Wireless Magnetic Parking Detector

Wireless Magnetic Parking Detector is the main important part in the outdoor parking guidance system, the radar & magnetic parking space is produced based on the dual sensor technology. It’s is proven to carry a 99% accuracy rate in detecting both normal and vertical parking space status. The sensor is installed under the ground of every parking space and is able to work outdoors under any weather conditions. It is not only waterproof and frost-resistant, but also resists corruption, the weight of vehicles and radio interference, which achieves protection grade IP68.

Wireless Manual Call Point

Wireless Manual Call Point - 5.0 out of 5 based on 30 votes

Wireless Manual Call Point

The Wireless Manual Call Point is powered for 10 years battery an emergency device that when activated transmits a radio frequency (RF) alarm signal. This alarm signal will cause all RadioLINK alarms (in the system) to sound and thereby warn occupants of the immediate danger. The device is powered by tamperproof lithium cells designed to last the life of the product. The cell power is monitored and an end of life signal is given when the batteries are depleted. The transmissions are frequency modulated (FM) and use Manchester coding to ensure robust signal integrity and avoid signal noise interference.

Wireless Smoke Detector

Wireless Smoke Detector - 5.0 out of 5 based on 30 votes

Wireless Smoke Detector

The Wireless Optical Smoke Detector sensor fitted with 10 Years Battery filled with a proprietary photoelectric sensor to quickly sense low energy smoke particles. This optical Alarm is sensitive to all domestic fire types but is especially sensitive to smoldering fires. The Sensor range features a high performance optical chamber protected by a sealed mesh screen to reduce insect and dust contamination and EMC protection to reduce false alarms.  In addition the sensor has an automatic dust compensation feature reducing further the risk of false alarms caused by dust build up.

Wireless Heat Detector

Wireless Heat Detector - 5.0 out of 5 based on 29 votes

Wireless Heat Detector

The Wireless Heat Detector is activated by heat from a fire, not smoke, which makes it ideal for kitchen installations and other areas where there is normally some level of smoke or fumes and where smoke Alarms may be subjected to false alarms.
The Sensor is powered by a 10 year sealed Lithium battery. The Alarm automatically monitors the battery every 40 seconds. If it is depleted it will give a short beep every 40 seconds.

Wireless Fire & CO Detector

Wireless Fire & CO Detector - 5.0 out of 5 based on 28 votes

Wireless Fire & CO Detector

The Wireless Fire & CO Detector is powered for life (>10 years) intuitive remote controller for RadioLINK wireless Fire and CO (Carbon Monoxide) Alarm systems. It is a completely wireless and can be wall mounted or free standing. In standby the Alarm system can be easily tested by just pressing the button. This will test and sound all the Alarms. When the system is activated the triggering Alarm can be identified (located) by simply pressing the button. Once identified it may then be silenced by pressing the button again. The Ei450 will identify the triggering Alarm and indicate if it is a fire (smoke or heat) or CO (Carbon Monoxide) Alarm by flashing the appropriate icon.

Room Occupancy Detection System

Room Occupancy Detection System - 5.0 out of 5 based on 5 votes

Room Occupancy Detection System

Our Room Occupancy Detection System can detect and monitor the presence of people, in real time. Automatically detect occupancy in meeting rooms, offices or workspaces. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.

Table Occupancy Detection System

Table Occupancy Detection System - 5.0 out of 5 based on 5 votes

Table Occupancy Detection System

Our Table Occupancy Detection System detect and monitor the presence of people, in real time. The small, battery-powered sensors simply stick to the underside of a table, enabling you to detect real-time presence and continually monitor table occupancy. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.

Desk occupancy Detection System

Desk occupancy Detection System - 5.0 out of 5 based on 5 votes

Desk occupancy Detection System

Our Desk Occupancy Detection System accurately detect and monitor passive infrared radiation (PIR) emitted by a person sitting at a desk. When a person enters the sensor’s field of view, the sensor detects motion and tells you someone is present within that space, without detecting people in the surrounding areas. We recommend installing this sensor under the table instead the floor hence this will not damage by any external force. All Wireless sensors battery life typically 5+ years or more can be configured between 10 minutes and 5 hours to extend battery life.  All sensors send securely to a local network or the cloud — via Ethernet, LTE.

Page 2 of 63