Designer of Alarm System, Central Monitoring, Toilet alarm, Master Clock, Nurse Call, Parking guidance, Security Systems, Voice

For the access to the fire alarm signal center to trigger voice alert to be played automatically.

FEATURES：

1. With 32 alarm inputs(Supportive of receiving switching signal or DC12V～24V ) to receive signal from firm alarm center
2. With 8 alarm outputs(Normally open contact) to connect external alarm light and display alarm status
3. Multiple IP network alarm matrixes can be used to extend the range of the interfaces;
4. To automatically send the alarm signal to the server and broadcast the task programmed in advance
5. With a standard RJ45 port  supportive of crossing network segment and router, accessible to the system if the Ethernet is available

For amplifying audio signal use.

FEATURES：

1. With a 2U standard rack cabinet carrying a high-end aluminium alloy panel, combining the aesthetics and duration
2. With an advanced and efficient power amplifier circuit.
3. With a super power output and super loading capacity
4. With an efficient cooling system in the short duct structure of the amplifier.
5.With the protection over the short circuit output and DC output; with the protection against the overheating and limiting voltage;
6. With a professional hi-fi sound effect;
7. With a constant voltage output of 100V and 70V and a constant resistance output of 4-16 ohms with an unevenness ratio of ≤1.5db

For the office, the classroom ,and the meeting room...etc communication.

FEATURES：
1. With an integration of the network audio decoding and digital amplifier and speakers and a installation of wall-mounted design;
2. With a high-speed dual-core (ARM + DSP) chip of industrial grade; start time≤1 s;
3. With a built-in hi-fi speakers and stereo power amplifiers of Class-D.
4. With a built-in loop detector to remotely monitor the working conditions of the speaker; easy to maintenance;
5. To remotely adjust the volume of the output on the server or to adjust the volume through the volume knob on the local device;
6. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.
7. Options for constant voltage backup module

IP Remote Controller for IP based PA system.

It`s installed in public areas ,like playgrounds podium,it`s available for one-way broadcasting.

FEATURES：

1. To broadcast on site; with a 4.3 inch colored LCD screen (Chinese & English interface) and a wall-mounted installation, start time ≤1s
2. With 8 audio inputs (6 for microphone & 2 for lines) and 1 audio output.
3. To remotely broadcast to other IP terminals through network   
4. To display any programs in the server or in the SD card; with functions to pause, forward and backward;
5. With one-touch broadcasting function (with 8 programmable buttons to preset the program source and target partitions) and a wireless remote controller
6. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.

It`s th integration of IP audio terminal and common amplifier to connect with ethernet directly and connect to the speaker.

For the office, classroom, meeting room ...etc communication.

FEATURES：
1. With a compact and a wall-mounted design to save space;
2. With a high-speed dual-core(ARM+DSP) chip of industrial grade whose starting-up time is ≤1s;
3. With a built-in digital amplifier of D-class; with a power output(8 ohm) of 2x10W or 2x30W with less emission of the heat and higher efficiency;
4. With an analog audio input and a local volume control knob, With an audio output to connect with the external amplifier;
5. With indication of status light, can display a variety of status of terminals in real time (such as online and offline etc.)
6. With 1 alarm output and 1 alarm input interface.
7. Support configuration remotely and upgrading online.
8. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.

It`s integration of the audio terminal and the common amplifier to connect with the enthernet and connect to speaker for IP PA system.

For the integration of the terminal and the amplifier to save the rack space includes PoE options.

FEATURES：
1. With rack-mounted design; with high-performance of network constant voltage power amplifier; starting time ≤ 1s;
2. With a built-in digital amplifier of D-class; with 60W/120W/240W/350W (constant voltage of 100V) outputs for options; with less emission of the heat and higher efficiency; with the power-saving mode for no signal input;
3. With 5 input channels whose volumes can be adjusted either respectively or unified
4.With the random setting of priority for the 5 input channels (The microphone input on the front panel has the highest priority default )；
5. With the audio line output to connect with the external amplifier;
6. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.

For multi-partition and same sound source environment.

FEATURES：
1.Unique 8 partitions function, suitable for multi-partition and same sound source environment.
2. Make the voltage amplifier power line joint back to audio terminal, then the terminal partition output to speakers (partition choice is remote controlled by the server).
3. With 8 channel short circuit outputs.
4.It contains Network audio terminal characteristics.
5. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.

Suitable for the requirements of broadcasting and calling etc.

FEATURES：
1. With the Rack design (1U) and an anti-corrosion panel made of aluminum alloy; with a TFT LCD screen and a control keyboard;
2. With the high speed Industrial dual-core(ARM+DSP) chips; start time ≤ 1 second;
3. With 1 line output to connect to the external amplifier;
4. With the acoustic control to the external amplifier; and the maximum output of controlled power supply is 1000w; to use for a higher output of controlled power supply.
5. With one alarm output to control 24V forced power supply
6. Program (saved in server) on demand can be done on device(English/Chinese menu), and output from the local line output;
7.With a built-in speaker and a microphone; available to make a full duplex talk and a broadcast to other terminals;
8. With a standard RJ45 interface supportive of crossing network segment and router, accessible to the system if the Ethernet is available.

For two-way video communication in the indoor and outdoor usage;

FEATURES：

1. Compatible with standard SIP protocol, independently accessible to VOIP phone system.
2. Stable and durable with a high-end aluminum panel and a waterproof ratio of IP54.
3. With a 7 Inch touch screen, resolution 800*480, and can be used under sunlight.
4.Full-duplex intercom (with the function of echo cancellation) and three kinds of call modes on  touch screen for options:
    a.One-touch call, the name of the call key is configured in the webpage
    b.Multi-key call, 10 shortcuts call per page (40 in total) and the name of each key is configured in webpage
    c.Keypad call, enter the number on numeric keypad to call

5.With an independent physical call button and an indication of button name on LCD on its right side.
6. With a built-in 3W speaker and a microphone, available for hands-free calls and receiving the broadcast.
7. To broadcast to the areas permitted.
8. With a built-in digital camera of the H. 264, D1/CIF coding format. available for the two-way video intercom.

For the communication in indoor/outdoor intercom.

FEATURE：

1. Compatible with standard SIP protocol, independently accessible to VOIP phone system.
2. With a 6mm-thick aluminum panel; provided with a special screw and the equipments against puncture to avoid any man-made damages.
3. With a waterproof ratio of IP54 ( with waterproof cover); with the installation of embedded or surface-mounted design.
4. With a built-in 3W speaker and microphone, available for hands-free call and receiving broadcast;
5. With a built-in digital camera of the H.264, D1/CIF coding format to make a full duplex intercom.
6. With a built-in flash memory of large capacity
7. With a built-in digital audio processor, To enhance the effect of noise reduction and improve the voice pick-up distance and audio quality.
8. With audio output interface which can be connected to active speaker or headphones.