Designer of Alarm System, Central Monitoring, Toilet alarm, Master Clock, Nurse Call, Parking guidance, Security Systems, Voice

Master Clock System Wired

The Synchronous Wire system is the most popular system in the Master Clock System. Clocks are run using a power circuit that acts as its time base. The clocks receive an hourly correction which synchronizes both the minute and the second hand. Every 12 hours the clock receives a daily correction to keep the clock perfectly synchronized.

The integration of the clocks into this system is effortless. Providing maximum adaptability, that clocks are capable of recognizing 59 minute correction, 58 minute correction as well as National Time/Rauland correction.The system can be powered using either 24V, 115V or 230V.

IP Master Clock System

IP Clock System gives you piece of mind and total control. Each clock is powered by PoE or Power over Ethernet, which provides power and data over the same Ethernet cable. Each clock has the ability to receive its time from a (S)NTP time server, there is no need for a master clock.

All IP clocks within the system can be controlled independently using built-in web interface. This software allows you to monitor every feature of the IP clock system from anywhere with a network connection. No need to worry about your current system, PoE can integrate easily with existing networks..

Wireless Master Clock System

TalkBack Technology is revolutionizing the way clock systems operate. Along with providing accurate and precise time, the TalkBack System allows the secondary clocks to report back its current battery levels, signal strength, mechanical (analog) or display (digital) alerts, the last time a clock received a signal and much more to the master clock. Most wireless clock systems can only receive the time, but with our TalkBack Technology, the TalkBack System allows facility managers to be completely proactive when it comes to monitoring and maintaining the clock system. No longer are the days of hearing of broken or dead clocks from other personnel within the building

WiFi Master Clock System

Wireless Clocks System operate on the patented 915-928 MHz frequency-hopping technology (2.4 GHz frequency range available). This technology allows multiple secondary clocks to operate on the same frequency range without interfering with any additional wireless products you may have.

Wireless System begins with the master clock, which can receive time from any SNTP/NTP server or GPS satellite. The master clock then sends out a signal to the secondary analog and/or digital clocks. Once the secondary clocks receive the signal, they have the ability to retransmit that signal to surrounding clocks, ensuring that all timekeeping devices display the accurate time.

Designed to assist security personnel to detect and identify Narcotics substances and devices allowing them to be isolated and safely removed or dealt with on site. These detectors are frequently used in airports, border post as well highly security areas.

Flexible and easy to operate portable hand held Narcotics detector, capable of both vapors and particulate sampling, which does not use a radioactive source or any consumables. Vapors’ are sampled directly by vacuum into the sampling nozzle.

Designed to assist security personnel to detect and identify explosive substances and devices allowing them to be isolated and safely removed or dealt with on site. These detectors are frequently used in airports, border post as well highly security areas.

Reliable, Efficient Human Presence Detection for a Variety of Security Inspection,

Its  one-of-a-kind security inspection system that detects human beings hiding in vehicles or containers loaded on vehicles by sensing the vibrations caused by the human heartbeat.

Overhead Door Track Protectors, are protect the tracks of overhead doors from forklifts, pallet trucks, and other vehicle traffic. Units feature a 6" square base plate with a 3" notch out and 9/16" diameter mounting holes. All steel construction with safety yellow powder coat finish. Optional mounting hardware available.

Structured Rack Guards protect against damage to pallet racking and wall corners. Rack guards are easy to install to concrete surfaces and feature four mounting holes for maximum stability. Made of 6" cast steel with a safety yellow powder coat finish for durability. Installation hardware available.

Steel Pallet Rack Guard, features all steel construction for superior rack protection. Rack guards feature offset base plates that allow closer placement to rack legs. A heavy duty mid-rail provides additional impact protection. Finish is a high visibility yellow powder coat finish.